Universal Cables Limited
Categories
Contact Us

Universal Cables Limited

Shandong Factory
High-Tech Zone, Zhangqiu, Jinan City, China
Tel:+86 531-83689222
Fax:+86 531-83689444

Kunshan Factory
268, Huangpu River Road, Dianshanhu Town, Hunshan City, China
Tel:+86 512-57429205
Fax:+86 512-57429201

Sales office

Tel:+86 531-88817113
Fax:+86 531-88819113
E-mail:inquiry@uecable.com
Web Site:www.ue-cable.com

300/500V Mica+SR Insulated Overall Screened Fire Resistant Control Cables (2-4 Cores Multicores)

300/500V Mica+SR Insulated Overall Screened Fire Resistant Control Cables (2-4 Cores Multicores)

Supplying you with customized 300/500v mica+sr insulated overall screened fire resistant control cables (2-4 cores multicores), it is one of the reliable 300/500v mica+sr insulated overall screened fire resistant control cables (2-4 cores multicores) manufacturers and suppliers, welcome to...

Product Details

Supplying you with customized 300/500v mica+sr insulated overall screened fire resistant control cables (2-4 cores multicores), it is one of the reliable 300/500v mica+sr insulated overall screened fire resistant control cables (2-4 cores multicores) manufacturers and suppliers, welcome to wholesale our products at good price from our factory.

300/500V Mica+SR Insulated & Overall screened fire resistant control cables (2-4 cores& Multicores)

(CU/MGT+SR/OS/LSZH 300/500V Class 1)

(PH120) (CU/MGT+SR/OS/LSZH 300/500V Class 2)

Application:

The cables are primarly intended for use in the following applications:
BS 5266-1 for emergency lighting of premises
BS 5839-1 for fi re detection and fi re alarm systems in and around building
BS 5839-8 for voice alarm systems
BS 5839-9 for emergency voice communication systems.

STANDARDS:

Basic design to BS 7629-1

FIRE PERFORMANCE

Circuit Integrity

IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180);

BS 8434-2 (120mins); BS 5839-1 Clause 26 2e; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1)

Circuit Integrity with mechanical shock

EN 50200(PH120); CEI 20-36/4-0

Circuit Integrity with mechanical shock & water spray

EN 50200 annex E

System circuit integrity

DIN 4102-12, E30 depending on lay system

Flame Retardance (Single Vertical

Wire Test)

EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2;

VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*

Reduced Fire Propagation

(Vertically-mounted bundled wires

& cable test)

EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4

Halogen Free

IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*

No Corrosive Gas Emission

IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*

Minimum Smoke Emission

IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*

No Toxic gases

NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.

VOLTAGE RATING

300/500 V

CABLE CONSTRUCTION 

Conductors: Plain annealed copper wire, solid according to IEC(EN) 60228 class 1, stranded

according to IEC(EN) 60228 class 2.

Insulation: Mica glass fire resistant tape covered by fire resistant silicone rubber compound type EI2

as per BS 7655-1.1.

Cabling: The cores are cabled together in concentric layers with suitable non-hygroscopic fillers.

Overall screen: Aluminum/polyester tape with tinned copper drain wire.

Circuit Protective Conductor: Uninsulated tinned copper conductor of the same section and class

as the insulated conductors in the 2-, 3- and 4-core cables. Drain wire of 0.5mm2 tinned copper

conductor is provided in cables of more than 4 conductors.

Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH

compound type SW2-SW4 as per BS 7655-2.6 can be offered.)

COLOUR CODE

Insulation Colour

2 cores blue - brown

3 cores brown - black - grey

4 cores blue - brown - black - grey

(Colour Code Up To 4 Cores In Accordance to HD 308)

7 cores centre: brown 1st layer: brown - black - 4 cores white

12 cores centre: brown - black - white 1st layer: brown - black - 7 cores white

19 cores centre: brown 1st layer: brown - black - 4 cores white

2nd layer: brown - black - 10 cores white

(on request the cores can be one colour only, identified by printed numbers

Sheath Colour: Colour red or white (other colours on request)

Physical AND THERMAL PROPERTIES

Temperature range during operation (fixed state): -30°C – +90°C

Temperature range during installation (mobile state): -20°C – +50°C

Minimum bending radius: 7.5 x Overall Diameter

Electrical PROPERTIES

Dielectric test:

2000 V r.m.s. x 5' (core/core)

Insulation resistance

≥300 MΩ x km (at 20°C)

Short circuit temperature

350°C

CONSTRUCTION PARAMETERS

Cable Code

No. of Core X Cross Section

Nominal Insulation Thickness

Nominal Sheath Thickness

Nominal Overall Diameter

Approx.

Weight


mm2

mm

mm

mm

kg/km

2 core,

(PH120)

2x1.0

0.6

0.9

7.9

85

(PH120)

2x1.5

0.7

0.9

8.8

105

(PH120)

2x2.5

0.8

1.0

10.2

150

(PH120)

2x1.5

0.7

0.9

9.2

110

(PH120)

2x2.5

0.8

1.0

10.3

155

(PH120)

2x4.0

0.8

1.1

12.2

220

3 core

(PH120)

3x1.0

0.6

0.9

8.4

105

(PH120)

3x1.5

0.7

0.9

9.3

130

(PH120)

3x2.5

0.8

1.0

10.8

190

(PH120)

3x1.5

0.7

0.9

9.4

135

(PH120)

3x2.5

0.8

1.0

10.9

190

(PH120)

3x4.0

0.8

1.1

13.0

280

4 core

(PH120)

4x1.0

0.6

1.0

9.3

125

(PH120)

4x1.5

0.7

1.0

10.3

165

(PH120)

4x2.5

0.8

1.1

12.0

240

(PH120)

4x1.5

0.7

1.0

10.5

170

(PH120)

4x2.5

0.8

1.1

12.1

250

(PH120)

4x4.0

0.8

1.2

14.4

350

7 core

(PH120)

7x1.0

0.6

1.0

10.5

175

(PH120)

7x1.5

0.7

1.1

12.1

230

12 core

(PH120)

12x1.0

0.6

1.1

14.5

300

(PH120)

12x1.5

0.7

1.2

16.0

380

19 core

(PH120)

19x1.0

0.6

1.2

17.5

470

(PH120)

19x1.5

0.7

1.3

17.5

470

Electrical PROPERTIES

Conductor Operating Temperature : 90°C

Ambient Temperature : 30°C

Current-Carrying Capacities (Amp)

Nominal

Cross

Section

Area

Reference

Method 4

(enclosed in an conduit

insulated wall etc)

Reference Method 3

(enclosed in conduit on a wall or ceiling, or in trunking)

Reference Method 1 (clipped direct)

Reference Method 11

(on a perforated cable tray), or Reference Method

one 3-core

cable or one

4-core cable

3-phase a.c.

one 2-core cable single phase

a.c. or d.c.

one 3-core

cable or one 4-core cable 3-phase a.c.

one 2-core

cable singlephase

a.c. or d.c.

one 3-core cable or one 4-core cable

3-phase a.c.

one 2-core

cable singlephase

a.c. or

d.c.

one 3-core cable or one

4-core cable

3-phase a.c.

1

2

3

4

5

6

7

8

mm2

A

A

A

A

A

A

A

1.5

16.5

22

19.5

24

22

26

23

2.5

22

30

26

33

30

36

32

4

30

40

35

45

40

49

42

Voltage Drop (Per Amp Per Meter)

Nominal Cross Section Area

2-core cable d.c.

2-core cable single- phase a.c

3-core or 4-core cable 3-phase a.c.

1

2

3

4

mm2

mV/A/m

mV/A/m

mV/A/m

1.5

31

31

27

2.5

19

19

16

4

12

12

10


Related Products